What are recovery tracks and how to use them: detailed instructions

Content

• Types of sand tracks
• Step-by-step instructions for sand tracks
• Practical advice
• Where to buy sand trucks

Sooner or later, every off-road enthusiast will learn about the existence of such a device assand track. What are sand trucks and why are they needed? These are special pads under the wheels that provide traction in conditions where the car skids. They are used on sand, in mud, on snowy roads or in rocky areas, where you need to create a temporary "bridge" for passage. Modern models are made of strong reinforced plastic or aluminum.

Types of sand tracks

1. Metal ones are strong, but heavy, prone to corrosion and difficult to transport. They are inevitably deformed during use. Often they are made of aluminum, such models are not prone to corrosion, but are more expensive.
2. Plastic ones are the most popular due to the optimal combination of weight, strength and convenience. They are easy to clean and practically do not require maintenance.

When and where to apply

• Sand.A classic use case. Tire pressure reduction and proper track installation ensure towing-free departure.
• MudPre-clearance or the use of a jack is often required. Tracks easily fall through in the dirt, so it is important to fix them correctly.
• Snow.They work similarly to dirty situations, but digging is easier.
• Stones and deep ruts.They are used to level the surface or as a bridge over an obstacle.

Step-by-step instructions for sand tracks

Step 1. Safety first.Before starting any action, make sure the car is in park (P or neutral in the "mechanics") and the handbrake is on. Without it, you can not only damage the car, but also create a dangerous situation for others.

Step 2. Lower the tire pressure.If you are stuck in the sand and have not yet reduced the pressure in your tires, now is the time. Use a pressure gauge and bring the pressure to 15-20 PSI (approximately 1.0-1.4 bar). This will increase the contact area of ​​the tire with the surface and improve traction.

Step 3. Assess the situation.Before you decide where to go, look around. If there are obstacles or trees in front of you, it may be easier to reverse. Always choose the safest and least risky way out.

Step 4. Preparation of tracks.To begin with, you need to clear the space in front of the wheels. Tracks should be as deep as possible under the wheels so that they start working immediately when moving. In the sand, it is convenient to use the back side of the tracks as an improvised shovel.

Step 5. Installing tracks.Install tracks under the drive wheels. Place them at an angle of about 45 degrees in the direction of travel. Make sure the track teeth are pointing up - they provide traction. Pour some sand under the truck to create support and prevent it from falling.

Step 6. Neat exit.When the tracks are installed, and the path is free of people and obstacles, you can leave. Engage low range, if available, and start moving slowly. Without sharp accelerations! Constant thrust and smooth motion are more important than speed. Excess gas can cause skidding and damage the tracks or tires.

Step 7. Take away the tracks.When you get out on a hard surface, don't forget about the tracks. Sometimes they get buried in the sand, and it takes effort to get them out. Shake them from side to side - this will help pull them out more easily. Then put them back in the trunk for your next adventure.

Practical advice

• It is better to use four tracks — for the front and rear axles. This will ensure maximum stability.
• Attach bright straps to the tracks - this will help not to lose them in the sand or mud.
• In difficult situations, you can stack tracks on top of each other or place branches/stones.
• Do not accelerate - sharp gas will lead to skidding and damage to the tracks.

Additional applications of sand tracks

Sand trucks are universal. They can be used as a support for a hi-jack, as an improvised bridge, a jacking platform, and in an emergency - even as a shovel. Some models are equipped with slots for fasteners and work as anchor plates.

Care and storage

After use, rinse the tracks with water and check for damage. It is better to store in the trunk or on the roof, using special fasteners. Try to avoid storing in direct sunlight - this reduces the life of plastic models.

Where to buy sand trucks

If you often go out into nature, participate in off-road activities or simply want to be ready for anything, high-quality sand tracks are a must-have item in your kit. In the online storeVnedorognik.uayou will find a wide selection of durable and reliable sand trucks, as well as accessories for their storage and installation. We offer only proven brands and fast delivery throughout Ukraine.

Expert consultation