Suspension lift - what is this and which elevator to choose?

If you have thought about improving your car, this is one of the most effective ways to increase the ground clearance of an SUV.Suspension lift- this is a way to raise the car and increase the descent angles, the depth of the ford overcome and favorably affect the passability.

Now you can choose from 2 ways to achieve the desired result:

Body lift- when choosing this solution, you install a kit for lifting the body from the frame using special spacers.

Suspension lift- a method of lengthening it, and, as a result, raising the entire car, including transmission elements and the frame. Its installation will make it possible to install larger wheels and significantly improve off-road characteristics.

The choice of method depends solely on your tasks and budget. Let's take a closer look at the pros and cons of each option.

Body lift (Body Lift)

This is a way of preparing the car for the installation of large wheels. For this purpose, third-party manufacturers produce special onessets of spacers, which must be installed directly under the body of your vehicle. Metal, fluoroplastic or kaprolon are mainly used as materials, as they are cheap and durable. As a rule, the height of such elements varies between 2-3 inches. For some cars, with a significant lift in this way, it will be necessary to lengthen the steering shaft, brake system pipes, rods, wiring, fuel line, etc. But although it sounds difficult, in reality it is not, as it is still not expensive and will not take much time.

Advantages of body lift:

• low cost;
• the geometry of the suspension is preserved;
• the center of gravity practically does not change;
• ease of installation.

Disadvantages of a body elevator:

• requires many modifications with a large lift;
• does not change suspension limitations;
• impossibility of installation on cars with a load-bearing body.

But if you need to improve passability, spending a minimum amount of money on a vehicle with a body structure, you can resort to radical measures - to put large wheels, cutting arches under them in the body so that they do not rub when turning and in the range of operation of the suspension.

It is worth giving preference to high-quality solutions and installingbody liftin good services, as with improper installation or poor quality, you can tear the body from the car frame under heavy loads.

Suspension Lift (Suspension Lift)

This method involves modifying the car bymodification of its suspension. There are two options for this - to understand all the nuances of components and their compatibility both with each other and with the vehicle itself, or buy ready-made kits (kits), specially developed and tested for your model. Also, it is worth adding that this option is the only one for owners of cars with a load-bearing body, which does not require changing key structural elements and body parts. Depending on what kind of work is done on your car, its features and the goals of the owner, you should select and replace the elements of this system.

Reinforced ones are installed in the spring suspensionsprings,shock absorbersand other details. And in the spring they change the elasticity of the strokespring. To do this, spacers can be installed between them and the frame, or the number of sheets can be increased. In addition, you should not forget about other equipment, such as a cardan shaft. When designing a car, the manufacturer calculates a certain angle of its operation, and with this modification, it should be adjusted to avoid accelerated wear of splined joints. To do this, you can install a castor cat, which will allow you to adjust the angle of operation of this unit.

This modification option is more expensive than Body-lift and more time-consuming, but it allows you to increase and raise the lower parts of the transmission and significantly improve the clearance, and the higher your SUV is, the more obstacles it can overcome.

And if, when choosing the first option, you will still be able to install it yourself, then it is better to entrust the modification of the second car to specialists in the service, since they have the skills and special skills. tools for carrying out the necessary manipulations.

Advantages of a suspension lift:

• increases bridge runs;
• improves road clearance from the lower points of the car;
• improves geometric patency;

Disadvantages of a suspension lift:

• significant cost;
• difficulty in installation;
• increases the center of gravity;
• slightly impairs handling.

In conclusion:

So, if you want to keep your car working in optimal mode, both options will do, but with the condition of small modifications, without fanaticism. By raising your car by 2-3 cm due to the installation of reinforced elements of the suspension and body by 3-4 cm spacers, you will get a good lift for the optimal price.Buy spare parts for SUVsand not only you can always at Vnedorognik.