How to remove the brake disk: Guide to dismantle brake discs

Brake discs- one of the most important parts of the car. They allow the car to stop, so it is extremely important to know how to remove the brake disc for replacement or maintenance. In this article, we will look at how to disassemblebraking systemenough to remove the brake disc on the front and rear axle of the car, and what to do with the frozen disc.

How to remove the front brake disc

• Step 1: Preparation

Before starting work, be sure to turn off the car and make sure that it is on a level surface. Don't forget to apply recoil.

• Step 2: Wheel removal

Using a screwdriver, loosen the wheel nuts and remove the wheel.

• Step 3: Removing pads

Press down on the piston in the brake master cylinder and remove the two mounting bolts located inside the hub to disconnect the caliper. Slide the caliper without disconnecting the brake hoses to gain access to the disc. Straighten up brake padsand secure them with a clamp. Secure the caliper with wire. If the caliper frame prevents the disc from being removed, unscrew the bracket and temporarily remove it.

• Step 4: Removing the brake disc

Apply lubricantWD-40or brake fluid to the place where the disc is attached to easily unscrew the bolt that has boiled. The number of mounting bolts depends on the make and model of your car. Remove the disc brakes using a special brake disc removal tool. If the disc is stuck to the soup plate, tap it lightly to facilitate the disassembly process.

How to remove the rear brake disc

• Step 1: Preparation

Turn off the vehicle and make sure it is on a level surface. Do not forget to apply the emergency brake.

• Step 2: Wheel removal

Using a screwdriver, loosen the wheel nuts and remove the wheel.

• Step 3: Removing pads

Depress the piston of the brake master cylinder and unscrew the 2 mounting bolts on the inner side of the hub to disconnect the caliper. Move the caliper away without disconnecting the brake hoses to access the disc. Unclip the brake pads and secure them with a clamp. Secure the caliper with wire. If the caliper frame prevents the disc from being removed, unscrew the bracket and temporarily remove it.

• Step 4: Removing the brake disc

Lubricate the place where the disk is attachedWD-40or brake fluid for easy unscrewing of the bolt. The number of bolts depends on the make and model of the car. Remove the disc brakes using a special brake disc removal tool. If the disc sticks to the hub, tap it to facilitate removal.

How to remove a stuck brake disc

If the brake disc is stuck, try to treat it with a special lubricant (such as WD-40 or rust removers) that will help to eat away the rust.Do not use a hammer to avoid damaging the disc.

How to remove a brake disc: general tips

1. Do not use a hammer so as not to damage the integrity of the brake disc.
2. If the brake disc is stuck, try treating it with a special lubricant that will help ignite the rust.
3. Before starting work, be sure to turn off the car and make sure that it is on a level surface and securely fixed.
4. If in doubt, contact the service center ortuning studio.

Now you know how to remove the brake disc on the front and rear axle of the car. And choose the necessary quality onesspare parts for brakesat favorable prices for your car is always possible in our online storeVnedorognik.