Back 
Content:
Due to the threat of power outages at any time, it is necessary to ensure the operation of critical devices in the house. In this article, we will take a closer look at what factors should be taken into account duringchoosing a charging stationfor a gas boiler to ensure uninterrupted operation of this important device even in the event of a power outage.
What to pay attention to when choosing a power bank for a boiler?
1. Output power
Gas boilers usually consume from 70 to 150 W. It is important to choose a charging station with sufficient power for efficient operation of the boiler. For example, for a Protherm Lynx 24 boiler that consumes 96 W, you should choose a station with an output power that exceeds this figure. And the more devices you want to connect, the more power you will need. You can read more about the power of different deviceshere.
2. Capacity
The capacity of the charging station determines how long it will be able to power the boiler without recharging. It is important to choose a station with a spare capacity, taking into account the possible connection of other devices. For example, a stationBluetti EB3Awith a capacity of 268 Wh can support the operation of a Protherm Lynx 24 boiler consuming 96 Wh for 2.5 to 3 hours.
Overview of the Bluetti EB3A charging station
3. View of the sinusoid
The type of power supply is critically important for gas boilers. Usingpure sinusoidprevents potential problems with boiler electronics. When choosing a charging station, you need to make sure that it provides a pure sine wave.
4. Full charge time
A good charging station should charge quickly,preferably in 1-2 hours, to be ready for use in the event of a sudden power outage. Up to 4 hours is considered a normal charging time today. If the station takes more than 6 hours to charge, you should consider alternatives from other manufacturers that offer faster charging.
5. Battery type
Batteries basedLifePo4better because of their long service life (up to 3000 recharge cycles before 20% capacity loss) and stability. They are more reliable and safer for home power supply systems. The second popular type is lithium-ion batteries (Li-Ion), which are lighter compared to LifePo4 but only last up to 800 recharge cycles before losing 20% capacity.
6. Through charging
Through-charging function and UPS operation modeallow the charging station to work as a source of uninterrupted power. Such features are usually found in more expensive models such asAnchor 757orEcoflow Delta 2. They can be permanently connected to the network and automatically switch to battery power in the event of a power outage. And find outhow to connect any charging station to a gas boileryou can at the link at the end of the article.
7. Type of outlet
It is necessary to make sure that the charging station hasthe appropriate type of outlet. In Ukraine and most European countries, the European socket is the standard. Using stations with American sockets will require a converter, which can reduce the efficiency of the device and the operating time of devices connected to it.
Choosing the right charging station for your gas boiler is a matter of convenience and safety. By considering these factors, you can ensure a reliable and efficient power supply system for your home. Read about what there arealternative solutionsyou canat this link.
In stock
2min 
