Power bumpers banner
Home Exterior Power bumpers

Power bumpers

Filters
← Назад
Sort By:
On page:
Filters
Power bumpers from to
No products in this range.

    Power bumpers on SUVs

    SUV power bumper - auxiliary equipment that is installed on the front (or back) part of the car to protect its body from damage during an accident and various collisions. Unlike relatives, strengthened bumper are designed for more serious load and more stringent operating conditions. As a rule, they are preferred by offroud-athletes and off-road lovers.

    Front power bumper for SUV

    Depending on the mounting site, you can buy bumpers of two types:

    • front
    • rear

    On the first you can easily install a winch, on the second - a "gate" with a spare.

    Power metal bumper for car

    When choosing a bumper for the SUV, you should also pay attention to the material from which it is, in fact, made. Plastic bumpers and light alloys are suitable for installation of headlights, antenna and even winches (sometimes), but they are not capable of providing a good level of protection, unlike metal.

    The next thing to take into account is the angle of the slope. Some power bumpers are planted too low and reduce the front corner of the car. You should choose a bumper that will be quite high. In addition, it is very important that he does not have protruding or sharp angles.

    Advantages of reinforced bumpers:

    1. They provide reliable car protection in front and / or back, as they are made of high material.
    2. Good durability.
    3. They can withstand the weight of the average person.
    4. ? ?
    5. Some models are equipped with a built -in kangaroo that allows you to install additional lighting.
    6. They give the completed appearance of the SUV.
    7. Allow to "pick up" a car.
    8. increased tightness.

    It should be noted that not every car makes sense to put this metal structure. For example, a very strong and light bumper has been installed from the UAZ (not a patriot). It can only be reinforced when the car is used in the problem area or you need to install a winch. In other cases, the native bumper will be enough.

    It is also recommended to install the bumper power only on frame cars, as its installation on the SUV with a load -bearing body will not bring significant privileges on the off -road.

    Power rear bumper for car

    power bumper is a platform for installing a number of accessories that will make your trip safer.

    Modern cars with standard bumper have many sensitive elements, so when installing power it is important to make sure that it provides sufficient protection from below. Check that the enhanced bumper provides the ability to attach the factory towing hook.

    Terms of safe use of bumper to SUV

    When driving on public roads, the winch key should not stand for the front frontal plane of the bumper. Instead of rollers, it is recommended to use a cast iron key for steel rope, aluminum or plastic - for a synthetic rope.

    In the transport position of the winch cable must be securely fixed and stretched to the towing ear.

    the bumper must be installed in specialized service centers.

    Power metal rear bumper

    It is not allowed to weaken the tightening of the mounting, grinding wires, operation of the damaged bumper.

    The recommended gap between the bumper and the body should be 10-15 mm. A slight local increase or decrease in the gap in separate places is allowed.

    power bumper is rightly considered a good attachment for the SUV owner who is going on a trip to distant areas. Choose a bumper that will fully integrate with your car and provide a sufficient level of protection in emergencies. Also pay attention to the design and technologies of its production.