Why do you need a bottom protection

Owners of SUVs are probably familiar with such a concept as a protective plate. It is placed on the bottom of the car and prevents it from damage while moving rocky routes. Often one blow is enough to cause great damage and even cause a full stop of the vehicle. Protecting the crankcase of the engine will help relieve you of such problems.

What details protect steel protection

also plates should protect such parts as:

• steering rail;
• the oil pallet of the motor;
• front differential;
• a handout;
• transmission ;
• Fuel tank.

Replacing most of these components is a fun not cheap.

Does the car really need a bottom protection

? The regular elements are, of course, better than if there were no protection at all. But they are usually made of plastic or thin metal, only the engine and radiator are closed, and the other nodes at the bottom remain open. Only one getting a "confident" stone is able to break through an oil pallet or disable the gearbox or engine. Repair costs can be significantly more expensive than buying one set of protective plates. Also, one should not mention the fact that the car should be delivered to the service station on the evacuator in case of punching. If the breakdown occurred in a place distant from civilization, then the complexity and price of the task increases at times. At the time of repair, the car owner remains without a means of transportation.

Protection of the bottom for off -road is made of thick sheets of metal. They are able to cope with strong strokes on the road. Such products also cope with part of the car's weight, for example, while a congress from a steep ledge, helping to slip the car and get to a flat area as a skiing area.

?

• help overcome obstacles with minimal resistance, which is especially relevant when laying the path with deep snow, riding in a rocky area;
• they give more confidence when subjugating off -road;
• Improve the car aerodynamics at the expense of smooth profile;
• reduce the contamination of the pallet and other nodes.

Concerning the disadvantages, there is a slight increase in the mass of the vehicle. But this reduces the center of gravity, which has a positive effect on controllability and stability.

What materials make protective plates

Manufacturers use aluminum or steel to produce bottom. For ordinary intersecting terrain enough products about 3 mm thick, it is recommended to choose steel plates with a thickness of 4.5-5 mm, aluminum-6-6.5 mm under difficult conditions. The steel products are stronger, but their weight is larger. A prerequisite for the choice is the presence of anti -corrosion coating and minimal effect on the road lumen. Plus will be technological openings for maintenance.

vnedorognik . Check out the range, place an order, and we will promptly deliver to your settlement.

expert advice