VNEDOROGNIK БЛОГ
My blog
Event Calendar
Gallery
Tuning Atelier
Articles
Videos
B2B
SALES
Manufacturers
Delivery
Payment
Return of goods
Catalogs
Reviews
ABOUT US
Contacts
Dealers
Installation and maintenance
On the hard road, the suspension details are most often broken. Especially, this applies to springs and
spring is an important detail of the suspension, the main function of which is to smooth out shocks and shocks while driving on different roads. There are many factors on its condition, including:
- Keeping a lane;
- the degree of negative impact on racks and tips;
- SUV brake parameters.
When to change the spring
springs, like other elements of the car, are prone to wear. Many manufacturers recommend checking this design after each trip (especially problem area) for any defects. It should be noted that most often the loss of the properties of the spring is influenced by the following properties:
- the state of metal as a result of gradual wear;
- The presence of surface damage due to friction;
- Excessive load on a car or overcoming inequalities at high speed;
- metal corrosion.
the springs in the allotted state may not be the right to counteract the force that has arisen as a result of the inhibition of the car. Therefore, if you notice this negative phenomenon in your car - we recommend that you immediately replace it.
How to replace the spring with your own hands
How is the spring replacement in a professional car service and not only. Experts of our online store have prepared a step-by-step instruction for you, which you will be able to change the spring, having, in fact, all the equipment you need. So let's start:
1. Lift the car and secure it on the stands.
2. Unscrew the fastening bolts.
Important!
to avoid injury - hold the wheel when unscrewing.
3. Disconnect the locking mounts of the lower protection of the pallet of the engine.
4. Remove the engine from the engine.
5. Clean the fastening of the depreciation rack. Use a metal brush and a special spray (such as WD-40).
6. Using the end head and the pink-sketch key # 177, unscrew the attachment of the stabilizer thrust to the rotary fist.
7. Unscrew the fastening of the brackets of the stabilizer stabilizer and remove it.
Important!
Make sure that the stabilizer of the transverse stability is not discharged.
8. Clean the fastening of the depreciation rack and ball support to the rotary fist.
9. Unscrew the lower fastening of the depreciation rack.
10. Weaken the fastening of the ball support from the rotary fist.
11. Extract the mounting bolt.
12. Disconnect the lower lever from the rotary fist and clean the attachment of the rack.
13. Unscrew the top fastening of the depreciation rack and disconnect the lower part.
14. Slap the rotary fist using a hydraulic rack.
15. Pull the suspension lever down. Using a mounting lever, remove the rack.
16. Install the shock absorber on the springs.
Important!
when using a compression device, the springs must be securely grabbed by compressing the structure from opposite sides. Follow the correct position of the spring in the holder. Make sure that the springs have tightly entered the clamping handles.
17. Remove the spring and clean the shock absorber.
18. Turn the bundle of the depreciation rack and remove the upper resistance of the rack.
19.Remove the old spring.
20. Set the new spring to the shock absorber. To pull it down.
21. Install the upper resistance and the supporting bearing. Tighten the nut of the shock absorber.
Important!
follow the correct position of the spring. Avoid a skew.
22. Slide the spring and remove the fully assembled rack from the screed device.
23. Clear and process the seats of the shock absorber. Install it in a car.
springs - a rather important detail pendants , which will last a long time with proper and careful operation. They effectively mitigate the car shooters from the road, withstand its weight and determine the height of the road lumen.
The most important rule for their replacement is to do it on time (as soon as all kinds of malfunction has been detected). In addition, we recommend changing the springs together with the shock absorber, so as not to reduce the functional features of the car.
