How to remove the brake disk: Guide to dismantle brake discs

brake discs - one of the most important parts of the car. They allow the car to stop, so it is extremely important to know how to remove the brake disc to replace or maintain it. In this article, we will look at how to disassemble brake system so much to dismantle the brake disk on the front and rear axle of the car, and what to do with a jacket.

How to remove the front brake disk

• Step 1 : Preparation

Be sure to dilute the car before starting work and make sure it is on a flat surface. Do not forget to use the anticipation.

• Step 2 : Wheel removal

Using a bug, unscrew the wheel nuts and remove the wheel.

• Step 3 : removal of pads

Click on the piston in the working brake cylinder and twist the two fasteners that are inside the hub to disconnect the caliper. Slide the caliper without disconnecting the brake hoses to access the disk. Straighten the brake pads and secure them with a clamp. Secure the caliper wire. If the caliper frame prevents the disk from removing the disk, turn the bracket and temporarily remove it.

• Step 4 : Removal of the brake disk

Apply the WD-40 or brake fluid to the place of the disc mount to easily unscrew the bolt. The number of fasteners depends on the brand and model of your car. Remove the disc brakes using a special brake disc removal tool. If the disk is stuck to the soup, gently tap it to facilitate the dismantling process.

How to remove the rear brake disk

• Step 1 : Preparation

turn off the car and make sure it is on a flat surface. Do not forget to apply an emergency brake.

• Step 2 : Wheel removal

Using a bug, unscrew the wheel nuts and remove the wheel.

• Step 3 : removal of pads

squeeze the piston of the working brake cylinder and unscrew 2 fasteners on the inner side of the hub to disconnect the caliper. Slide the caliper without disconnecting the brake hoses to access the disc. Slide the brake pads and secure them with clamps. Secure the caliper wire. If the caliper frame interferes with the disk, unscrew the bracket and temporarily remove it.

• Step 4 : Removal of the brake disk

Lubricate the place of the WD-40 or brake fluid for easy unscrewing the bolt. The number of bolts depends on the brand and model of the car. Remove the disc brakes using a special brake disc removal tool. If the disk is stuck to the hub, tap it to facilitate the dismantling.

How to remove the dug brake disk

How to remove the brake disk: General Tips

1. Do not use a hammer so as not to damage the integrity of the brake disk.
2. If the brake disc is bought, try to process it with a special lubricant that will help ignite the rust.
3. Before starting work, be sure to dilute the car and make sure that it is on a flat surface and securely fixed.
4. If you have doubts, contact the service center or

Now you know how to remove the brake disk on the front and rear axles of the car. And to choose the necessary quality