How to install kung Road Ranger

content

• Preparing the body
?

• The owners of pickups who think about refining their iron horses have heard more than once about Kunga Road Ranger . They are known in the car environment due to their high quality and durability. However, before buying, it will be useful to learn how to install Kung Road Range.

  This manufacturer specifically develops hardtops for specific pickup models. Therefore, they always fit well into the design of the car and are easily mounted. The action algorithm is common to most brands. Consider the process on the example of a popular pickup Volkswagen Amarok 2010–2022 .

  

  Preparing for Kung's Installation

  A great choice for this SUV will be Kung Road Ranger Rh04 Profi 1900891 . Comparing with the base model, it has such useful options as:

  • Side windows with GPR-plastic that open up;
  • Connection to the central lock of the car;
  • Carpet decoration;
  • illumination;
  • rear glass heating;
  • Gas shock absorbers.

  

  Before proceeding to the direct installation of Kung, it will be necessary to unpack and prepare the body of the car.

  Undering order

  The product is delivered in a carton with wooden frames, which is tightened with packing tapes.

  1.Prepare a place in the workshop and gently put the box horizontally.

  2. Cut the screeds, lift the cardboard cover of the box.

  3. Disconnect the frames and other elements of the box.

  

  4. Carefully remove the package directly from the kung and carefully inspect it for scratches and damage.

  5. Everything necessary for installation, including the instructions, is under the kung. Therefore, it is necessary to lift it and get the accessories. The keys are fixed inside the kung.

  6. Make sure you have a full kit using the list in the instructions.

  Electricity connection

  Urtzing is followed by the preparation of wiring for the connection of Kung's electrical equipment.

  1. Remove the battery terminal. This will make it impossible to make mistakes in the electronics of the car.

  

  2. Carefully remove the stop light on the pickup cab and disconnect it from the onboard network.

  

  3. Install the plug with the output wiring in place.

  4. The wiring should be pulled through the cabin and connected according to the instructions for your car.

  Preparing the body

  To prevent the kung from damaging the pickup paint. It is included. It will also not be superfluous to make sure that a seal is glued across the bottom surface of the kung.

  

  1. Clean the body of dirt and debris, then close the door.
  2. Wipe carefully and degrease the surface of the sides that will face hardtope.Including a back leash.
  3. Glue the reservation film by trimming excess scissors. Make sure it fits snugly against the LFP.

  It is important that the body is not deformed. If everything is successful, you can start mounting the product.

  Installing Kung Road Ranger

  Doing everything on your own without damaging anything, it will be extremely difficult. Therefore, the work should be carried out at least together.

  

  Order of action as follows:

  1. Carefully place the kung on the sides to ensure that its seal is tightly adjacent to the booking film. There should be no gaps.

  2. Pull the wiring from the plug of additional stop signal in Kung.

  3. Iron inside the kung and connect the electricity.

  

  4. Set the clamps between the sides and the kung, but do not tighten them. Kung's fixation should only be made after the gaps are exposed.

  5. Tightening clamp should be staggered, starting from the cabin. First left, second to the right opposite it, third again to the left, etc.

  

  6. Put the rubber seals on the back door opening.

  

  7. Screw the terminal to the battery and test the work of the Kung Castle and electricity.

  reasons to buy kung on pickup

  Kung's installation is one of the most popular tuning options for pickup. This element of the exterior performs both practical and aesthetic function. Increases the practicality and functionality of the car, and also gives its appearance a more complete and harmonious appearance.

  Road Ranger plastic cabins are able to entertain not only good design, but also excellent tightness, durability and a wide range of options. The site presents many kunks of this brand at favorable prices, including Rh04 Profi. You can also complete the kung an additional trunk on the roof .

  

  ? Vnedorognik Workshops can install kung on your car in a few hours. Contacts .

  Instructions for installing Road Ranger Rh04 on the Volkswagen Amarok pickup you can download here

  Subscribe to our social networks