How to install kung on any pickup: step-by-step instruction

kung on pickup , including correct connection, installation and fixation itself.

Step 1: Preparing the freight compartment

Step 2: Kunga installation

You will need to connect the wiring to the pickup electrical system if your hardtop has built -in lighting. Find the wire harness under the body and connect the wiring from the roof to the harness. Test the lighting to make sure it is working properly.

After installation of hardtop and wiring connection, secure

Recommendations for the installation of kung for pickup

common mistakes that are made during kung:

• Lack of protective film at the edges of the body;
• Improper wiring;
• incorrect positioning of hardtop on the platform;
• Lack of installed rearward doors;
• Excessive tightening of the retainers;
• Lack of regulation of fuchsators and latches after installation;
• Damage to paint.

it is recommended to carry out a standard inspection of Kung's technical condition at least every 30,000 km of mileage to ensure that it is properly installed and the clamps are tightened. You should also check the performance of the latch system, brackets and more Kunga equipment . This will provide easy opening and closing of the rear glass and side shutters/windows. The detailed list of operations you need to be performed is given in your Kung's warranty book.

rest assured that, following the installation procedure described above, you will provide your hardophop for many years of failure.

Subscribe to our Soc network

>>