How to install and connect a towing?

content

• almost every second car owner is interested in this issue. It is quite important to do everything right, because it is unlikely that the false connection of the trailer turns will be a good solution. You do not want to have a problem with other road users or traffic road safety services.

  ?

  Parcope is a traction-binding device used to connect the trailer to the car, usually with this design of SUVs, even, even, and, and, even, and, even.

  structurally this part consists of two parts that are made individually for each brand of the car model. The first part is a crossbar (beam), which is fixed with special openings and mounts to the frame or body of the car. Accordingly, the second part is a paint ball that attaches to the beam.

  installation of a trendy means a number of necessary towing work, that is, using a trailer. What is important for car owners with an active lifestyle. When there is a need to transport building materials, objects that are not placed in the luggage compartment of the machine. Or you just decided to live a nomad, and why not - the horse is an iron, and the tent on the trailer can be decomposed.

  And if you have a cottage and you need to transport mother-in-law and from there, then buy a pump thing accurately, install a pattern and you can enjoy life.

  and do not make that error to use this traction-connecting device as a protective element because it is not true. This towing element cannot be installed if you do not use the trailer. If there is an accident, the devastating effects will be larger than the usual collision bumpers.

  

  ?

  Choose a part that is made for your brand model of the car, otherwise the device may simply not be suitable and will need to be changed or processed (which is not recommended). The towing device is equipped with special fasteners to connect to the car and with all the desired installation holes.

  Installation elements are required:

  • pit or trestle;
  • The actual design of the Tarcope;
  • drill and drill for metal (do not always be useful, but be at hand);
  • a set of wrench keys;
  • screwdrivers;
  • anti-corrosion processing agent;
  • passages;
  • soldering iron;
  • knife;
  • insulating tape;
  • a thermal tube.

  You need to drive the car to a viewing pit.

  It is necessary to turn off the power from the mains, for this purpose the terminal is displaced by minus from the battery.

  even before work we fully release the trunk from things and upholstery.;

  then remove the bumper as it will interfere with work.

  Add the necessary transverse part to the mounting site and make a mark if necessary.

  If there are no holes for connection, then they must be drilled and be sure to treat with an anti-corrosion.

  You still need to balance the load on the car frame to ensure reliable fastening. We make several holes in the middle of the luggage compartment and below, we treat corrosion. Next, add and secure the lining for amplification and tighten all the bolts with a key.

  ?

  mostly manufacturers complete the coloring structures with a full set of electricity, but sometimes you need to buy everything yourself. Electronic connection enters:

  • mounting plate;
  • special socket 7-coin or 13-coated (only on foreign cars only);
  • a set of required numbers;
  • Connection Scheme to the electrical network of a car.

  Because, before starting work, you have already disconnected the onboard networks by disconnecting the terminal from the battery, then you can proceed with the direct adjustment of electricity. To do this, attach the set of wires to the plug socket of the available and execute all the added scheme. The socket is fixed with bolts on the bracket and joined the main wiring.

  Electronics for Presses

  Scheme of connecting wires to the socket

  

  1. You need to use a special opening at the bottom of the trunk, which is provided to connect the fist of the Tholocope with wires. If you did the towing structure yourself, then you should make the connection holes yourself, for convenient installation.
  2. after installing the socket, it is necessary to pull the wire to the socket through the hole in the trunk.
  3. It is important not to confuse the order of connecting wires otherwise you will need to reconstruct everything because it will not work. In case of differences in the number of wires, buy a special adapter.

     Scheme of electrical engineering

     
  4. The connection process must be very accurate, reliable and neat. The wire should be cut and cleaned at the point of contact, perform this procedure on both sides by 0.5 - 1 cm from the beginning. The side going to the socket is cleaned by 1 - 1.5 cm.
  6. ends are soldered so that the conductor connects the cut edges of the wire.
  7. Be sure to check all connections to prevent closure. Connect the battery and make sure that the socket contacts are correctly connected. Just attach the light to the appropriate connectors and turn on the turns, brakes, dimensions and rooms.
  8. to protect the wires from locking or external damage, connect them with insulation tape, a heat shutter, or possibly available with a special device.
  9. wires should be fastened to the trunk walls, and then you can close the upholstery.
  10. Finally, to check the check, attaching the trailer, the performance of rotary, running lights and stop lights.

  Types

  As already known, sockets of two types are used, which is respectively varied by the number of contacts and the need for such connections.

  Features of the 7-Contact Impange

  

  This is the most commonly used species because it is quite easy to connect. It is mostly used in cars of domestic production and only for the necessary illumination.

  1. left turn.
  2. power by a positive charge.
  3. power by a negative charge.
  4. right turn.
  5. right size and backlight numbers.
  6. brake signals (stop).
  7. left dimension.

  

  such sockets are used mostly for American machines, rarely for European. All because they are often used instead of the usual trailer trailer, such are homes on wheels. Accordingly, more contacts are needed, for dimensions, fog lighting, and also the supply of electricity on the device inside the house.

  1. left turn and alarm of accident.
  2. fog-backlight.
  3. power by a negative charge.
  4. right turn.
  5. right dimension and room illumination.
  6. brake signals (stop).
  7. left dimension.
  8. backlight.
  9. Power with a positive charge (while off ignition).
  10. Power with a positive charge (when ignition is turned on).
  11. Negative charge power for 10 contact at 35 A.
  12. signal connection or spare free contact.

  13. pick up spare parts for a trailer

      Subscribe to our Soc network