Boiler charging station - what to look for when choosing?

Автор: Максим Перепелица

4 min.

Contents:

Output Power
capacity
a kind of sinusoid
full charging time
Type of battery
through charging

buy a border station in Ukraine in Ukraine in Ukraine Width =

In connection with the threat of power off at any time, you need to work critically important devices in the home. In this article, we will look at what factors should be taken into account when Selection of the charging station for a gas boiler to ensure the smooth operation of this important device, even in the event of electricity.

What to look for when choosing a Paveerbank for a boiler?

1. Output

gas boilers are usually consumed from 70 to 150 W . It is important to choose a charging station with sufficient power for the boiler efficient. For example, for a Protherm Lynx 24 boiler, which consumes 96 watts, you should choose a station with a output power that exceeds this figure. And the more you want to connect the devices, the more power you will need. You can read more about the power of different devices

2.Capacity

the charging station's capacity determines how long it will be able to feed the boiler without recharging. It is important to choose a station with a supply of the capacity, given the possible connection of other devices. For example, the Bluetti eb3a with a capacity of 268 W/h/h/h/2 hours.

review of the charging station Bluetti eb3a
3. Sinusoid view

a critical type of power supply is critically important for gas boilers. Using pure sinusoid prevents potential problems with boiler electronics. When selecting a charging station, make sure that it provides a pure sinusoid.

4. Full Charging Time

A good charging station should be charged quickly, preferably in 1-2 hours to be ready for use in case of sudden power outage. Normal time for charging is considered up to 4 hours today. If the station is charged for more than 6 hours, it is worth considering alternatives from other manufacturers that offer faster charging.

5. Battery type

Batteries based on lifepo4 are better due to their long service life (up to 3000 cycles of rechargeable for 20%loss) and stability. They are more reliable and safer for home energy systems. The second popular type is lithium-ion battery ( li-ion ), which are easier than Lifepo4 but withstand up to 800 cycles of reloading to loss of capacity by 20%.

6. Cross -charging

Through charging function and UPS mode allow the charging station to operate as a source of uninterrupted power. Such functions usually have more expensive models, such as >Anker 757 or Ecoflow Delta 2 . They can be constantly connected to the network and automatically switch to the battery when electricity is switched off. And you can find out how to connect any charging station to a gas boiler at the end of the article.

7. The socket type

You need to make sure that the charging station has a corresponding type of socket . In Ukraine and most European countries, the European socket is the standard. The use of stations with American sockets will need a converter, which can reduce the efficiency of the device and the time of operation of the devices connected to it.

Choosing the right charging station for your gas boiler is a matter of convenience and safety. With these factors, you will be able to provide a reliable and efficient power supply system for your home. Read about what alternative solutions can Expert consultation

Subscribe to our social networks