Ome Nitrocharger Sport Land Rover Defender 300+ kg rear 60147

OME Land Rover Defender 300+ kg rear shock absorber 60147

The Nitrocharger Sport 60147 shock absorber is a complete and high-quality design created by Australian engineers thanks to their vast knowledge of the automotive industry and innovative technologies. It is designed directly for the Land Rover Defender, which is felt even when driving at high speed on a regular highway or off-road. In addition, this device easily adapts to any road surface.

Important! The gas-oil shock absorber is designed for a constant additional load on the rear axle of 300 kg and above. It is used exclusively with the new ARB FK64 upper shock absorber mounting bracket.

Design features:

• Heavy-duty chrome-plated rod (diameter - 18 mm);
• The presence of a Teflon-coated piston (diameter - 35 mm) can significantly reduce heat generation and minimize the risk of oil aeration;
• Improved vehicle handling characteristics and ride elasticity over a wide range of loads are achieved through a multi-stage compression valve;
• The steel casing reliably protects the shock absorber from stones and various road debris;
• Polyurethane bushings - reduce noise and soften the suspension;
• Increased shock absorber wall thickness (up to 1.6 mm), which provides additional protection for all parts of the device;
• During active operation, the oil does not mix with air and does not foam, so the shock absorber does not lose its properties.

Note: To operate your car at 100%, we recommend using OME springs in tandem with the shock absorber. In addition, we strongly recommend replacing the double-tube shock absorber every 60,000 km to maintain the vehicle's suspension.

View all shock absorbers. Return to the general category - reinforced spare parts.