Ome Nitrocharger Sport Ford Ranger/Maz BT50 Rear Sports 60023

OME FORD Ranger 60023 rear shock absorber

The Nitrocharger Sport gas-oil shock absorber is the ideal solution for both on- and off-road use. It is designed exclusively for the FORD Ranger, thus significantly increasing its handling and control. This design is manufactured and tested by the best engineers in Australia.

The shock absorber assembly is quite simple and consists of a cylinder (divided into two planes: pneumatic and hydraulic) and a rod. The main feature of this device is that during active operation, the oil does not foam and does not mix with air, so the shock absorber does not lose its properties.

Features of the two-pipe shock absorber:

• Three-petal gland, which eliminates the possibility of dirt getting inside through the piston rod during compression;
• Heavy-duty chrome rod with a diameter of 18 mm;
• Multi-stage compression valve that significantly improves the vehicle's handling characteristics and ride elasticity over a wide range of loads;
• A load-resistant two-pipe mechanism made for a specific car model;
• Two cylinder planes: hydraulic and pneumatic. The first contains oil (does not foam and does not mix with air), and the second contains nitrogen, which is pumped in at a pressure of 20-30A;
• Steel casing - prevents stones and various road debris from entering the shock absorber;
• Polyurethane bushings - reduce noise and soften the suspension;
• Increased wall thickness of the shock absorber (up to 1.6 mm), which provides additional protection for the parts of the device.

Note: To operate your car at 100%, we recommend using OME springs in tandem with the shock absorber.

View all springs. Return to shock absorbers.

View all shock absorbers. Return to the general category - reinforced spare parts.