Land Rover Range Rover 4 dated 2012

Tow bar for Range Rover IV quick release

A towbar for Range Rover IV from the Polygon-Auto brand will help to significantly increase the carrying capacity of your car. It will require minimal intervention in its design.

The product is equipped with a removable coupling ball. Therefore, when there is no need to tow a trailer, the tow bar can be easily hidden under the plug and restore the standard appearance of the car. The kit also includes all the necessary equipment for connecting the electrical system.

The towbar is specially designed to fit the standard mounts of the Range Rover IV. The structure is attached to the SUV frame using bolted connections. For installation, you need to remove the bumper, no need to cut it.

Installation procedure:

1. Dismantle the bumper hatch, plastic dust cover and bumper.
2. Dismantle the side sensors and bumper amplifier (use M10x40 bolts for mounting the tow bar).
3. Attach the angle No. 2 and the eye to the vehicle frame without tightening.
4. Attach the plate to the angle No. 2 without tightening.
5. Attach the towbar to the body and fasten with standard M10x40 bolts.
6. Attach the angle No. 1 to the car frame without tightening.
7. Connect all parts and finally tighten all fasteners.
8. Replace the sensors, bumper and dust cover.
9. Connect the electrical part according to the attached wiring diagram.
10. Fasten the electrical socket to the bracket.
11. After driving 1000 km using the towbar, check the tightness of all fasteners and tighten if necessary.

View and buy another tow bar. Return to the general category - SUV exterior.