CTEK MXS 3.8 car charger

CTEK MXS 3.8 charger for batteries

The CTEK MXS 3.8 multifunctional device provides high-quality and safe battery charging. The model offers 2 patented charging modes - pulse and buffer. The entire process of the device is controlled by a built-in microprocessor.

Model features:

1. Seven-stage battery charging.
2. Preventive charge, desulfation.
3. Can be used in cold weather - minus 5 degrees and below.
4. Supports charging AGM batteries.
5. Protection against short circuits, poles misalignment, sparks.
6. The case is made according to the IP65 standard - protection against dust and splashes.

In standard mode, it charges batteries with a capacity of 80 Ah. The device also supports charging batteries up to 130 Ah.

• Input voltage: 220-240V, 50-60 Hz.
.
• Output voltage: Nominal: 12V
• Charge voltage: 14.4V, 14.7V
• Charging current: Max. 3.8А
• Reverse current*: <1Ah/month
• Fluctuations**: <4%
• Temperature range: -20°C to +50°C, at higher temperatures the output voltage is automatically reduced.
• Charging type: 7 stages, fully automatic switching between charging and keeping the battery charged.
• Battery type: 12V lead-acid batteries (Wet, MF, AGM, GEL)
• Battery capacity: 1.2-80Ah, up to 130Ah in charge maintenance mode
• Dimensions (L x W x H): 168 x 65 x 38 mm
• Insulation: IP 65 (protection against moisture and dust)
• Weight: 0.6 kg.

View all chargers. Back to general category - Electronics