New Bumper Arb Summit for Jimny includes time -tested solutions as pressed vertical racks and upper panel in the central part of the bumper, a central three -part grille and a compartment for the hidden installation of the winch control unit.
bumper arb summit pre -treated with zinc soil, which provides excellent corrosion resistance and painted with a corporate textured powder coating arb integrit ™ .
New Bumper is compatible with low -profile electric winches WARN and Dragon Winch with traction efforts to 8000 pounds , including wreng> join> wreng>. , Dragon Winch and is equipped with places for installing original PTF and washer Suzuki, additional ARB and IPF headlights, radio and cellular antennas.
in the central part of the bumper arb Summit for Suzuki Jimny is equipped with two special "heels" to install classic rail jacks or a new arb jack jack.
Dragon Winch 10000 HD is made in minimum size and excellent materials for installation in a large amount of transport, including Jimny. The traction effort created by the electrical automatic winch Dragon of 10,000 HD on the first turn is 4 ton. This model is best for small SUVs or special vehicles. The engine consumes a minimum of energy and feeds on a 12 Volt network. The length of the rope is 28 meters, and the speed of mowing at maximum load is 1.3 meters per minute, and with zero - 5.9 m/min.
This set is necessary to assist in case of situations on the road. This includes such rigging devices as:
This tideling unit is an extremely useful device that can change the vector of the cable and reduce the load on the mechanism, and therefore extend the life of both electric and manual winches. With this block you will increase the traction potential twice and be able to use it with objects up to 4000 kg . This mechanism is versatile, as it interacts with steel and synthetic cables and also has good resistance to deformation. It does not require additional equipment to work with it.
Ome engineers have confirmed that the new Jimny is suitable for shock absorbers and OME springs from the previous model.
existing components are completely suitable and can provide a lift of 40 mm and an additional course of suspension. However, OME engineers are convinced that there is an opportunity to improve the quality of the suspension work and increase the handling and are currently working on it.
Key moments that require refinement is the replacement of shock absorbers with Improved springs -design and characteristics and other components that will help adjust the geometry of the suspension with a lift of 40 mm.
ARB engineers have performed checking the front and rear blocking of the Airlocker on the new SUZUKI JIMNY SUVKI SUV 2021.
they were fully confirmed by the possibility of installing the blocking RD206 and and href = "../../../..////..// blokuvannya-diferentsial-arb-air- Locker-locker-jimny-jimny-zadniy-rd208"> RD208 from the previous model, but with a slight modification of the adjustment nut on the front blockage on the front blockage.
Expeditional trunk on the arb roof is already available for a new Jimny. The maximum load for these products is 30 kg .
To install the trunk you need appropriate installation of the . It is suitable for both the trunk arb deluxe with an article (# 3800160) and for Arb Flat Rack (# 3800180), but to the last one must additionally buy a plastic profile (# 4601015).
Multifunctional cargo basket of premium.
This light equipment uses high power LEDs and the reflectors conductive in their class, designed to maximize light output in the rays of the near, hybrid and far light.
Light output is constantly optimized by dynamic modulation of the actuator, which regulates the excitation current for LEDs, taking into account the environmental conditions and temperature of the lamp. The headlights have a 5-year guarantee and are designed for a long service life.
< src = "../..//..//..//..//trage/tinymce/20210914/mmmctxrofmy2gagbplmlnwcshe813Uf2wvin2ghhf.jpeg" Alt Triple St Evolution for Suzuki Jimny "Width =" 33%"Caption =" FALSE " />
Protective footsteps arb rock sliders for a new Suzuki Jimny 2021+ are made of durable tubular steel, which makes them ideal for use on steep slopes and rocky terrain.
They are installed in parallel with the car frame and protect the vulnerable sections of the body on both sides. Made of steel 60.3 mm of pipes and are mounted to the car frame with the help of installation brackets, bolts and nuts M10. The mounting pipes are made of steel 47.6 x 2.6 mm, and 4 mm steel brackets using laser cutting. Painted with black powder paint arb Integrit ™ , resistant to damage and scratches. The approximate weight of both thresholds is 18 kilograms .
?Чудовий мануал по доукомплектації Джимніка!
Стаття дуже цікава та інформативна , допомогла розібратись в деяких важливих моментах)
Дуже змістовна стаття. Допомогла чітко розібратись в тюнінгу Suzuki Jimny