How to fold a tent?

a tent is considered an important and necessary attribute in most hikes. It is important to follow the operating rules for it as long as possible. You also need to know how to fold the tent.

if you collect tent it will be wrong. The risk of damage will increase during storage. Store tents in special covers and in the dry state. If it is not possible to dry the fabric before laying in the case, then it should be done as soon as the time appears. Otherwise, there is a high probability of fungus.

assembly

Automatic tent is very popular because of their availability, ease of use. How to put a tent machine? The most common way is the eight:

1. In the first stage, you need to achieve the plane of the structure. To do this, you need to take opposite ends and reduce them like a book. Depending on the type of dome, the output should come out a triangle, a square, or a rectangle.
2. a flat design should be placed on a flat surface of a narrow part, namely an angle.
3. The lower part must be pressed with your foot and the upper part start swaying to the ground.
4. after closing the arches, the place of their joint is fixed by hand. The angles of one face are stacked on top of each other.
5. The frame in such tents is almost automatic, so when it is properly directed, it almost independently gather in an oval or circle.
6. At the end of the assembly it is enough to fill the protruding parts of the awning inside the circle and hide the tent in the case.

One person can handle the assembly tent.

assembling a tourist tent

There are not all travelers, so let's look separately how to fold a tourist tent. Installation and dismantling of tourist and camping tents is approximately the same.

Universal instructions for assembling a two -layer tent look as follows:

1. Inner part
2. metal arcs or racks are collected and installed in special places. It is also possible to fix with ribbons. It all depends on the design.
3. tent rises, tucked and fixed on top.
4. the bottom is fixed at the expense of pegs. They are clogged at an angle of 45 degrees.
5. If stretch marks are provided in the structure, they are mounted symmetrically.
6. At the end it is necessary to check the quality of tension of the awning - wrinkles and bevels should not be.

Subscribe to our Soc network