VNEDOROGNIK БЛОГ
My blog
Event Calendar
Gallery
Tuning Atelier
Articles
Videos
B2B
SALES
Manufacturers
Delivery
Payment
Return of goods
Catalogs
Reviews
ABOUT US
Contacts
Dealers
Installation and maintenance
Automobile radio is intended to provide communication in places where there are problems with mobile networking. With it, you can easily communicate with colleagues or other workers at a distance. But to buy a right is a half -thing, then you need to adjust it properly. Poor tuning will lead to obstacles, a small transmission radius and will not allow you to use right.
How to adjust the car radio station for truckers?
car stationary stations differ from portable rays with more power. They are installed in the cabin and feed on the onboard network, providing communication at considerable distances.
How to tune in a wave of truckers Ukraine? In the CIS countries, the 15th channel uses. Depending on the radio manufacturer, the letter designation of the grid on different models may vary. On some radio stations, the channel will be located in the grid D, on others - C or M. modulation of the truckers of AM. Some models of stationary bus stations are set up on a trucker grid. Others also understand how to adjust the right to the truckers, the buyer has to independently. In short then to adjust the wave you need : If the radio is noisy or badly pulled, you need to properly install and adjust the antenna. To do this, use a KCB meter. The antenna configuration should be performed in places where there are no concrete and metal obstacles nearby. car are the bi-bi zeb Rules of the antenna for radio station
After installation, be sure to set up the radio station. Without it, the signal will be much worse. The best solution is to use a professional antenna analyzer, but an alternative should be used as an CSR meter. It can be used to adjust the minimum coefficient of standing wave. The factor is less than 1.5. The higher you have this figure, the greater the loss of signal power. So, we choose a flat surface without interference nearby (ideally done in the city) and other similar antennas. We connect the CSV-meter as shown in the diagram. After disconnect and check the work of the radio station. portable radios are intended to provide communication at short distances. They are great for patrols, travelers and in the work that requires operational communication. For the most part, portable radios work in a civil range, which means that they do not require permits. Now, let's take a closer look at how to set up portable radios by one frequency: An important element in the setting is an individual signal or call sign. It can be put in the form of a letter or digital code with a unique meaning. This instruction is universal, suitable for solving questions on how to adjust the Ratie Motorola, Alan, Stabia, etc. Before using a particular model, it is recommended that you carefully read the operation of operation as information can be contained in the setting of non -standard models. It comes with devices, and is presented as a PDF on the page of each individual model.
Setting up a car antenna
