Cigarette lighter PULSO 200A (up to -45С) 2.5m in a cover

PULSO 200 A starter wires are a reliable assistant on the road that will help start a car with a discharged battery by connecting them to the donor battery using the terminals.
High-quality clamps are tightly connected to the battery terminals, which prevents dangerous sparking.
Pulso jumper wires are made of high-quality materials, they are flexible and can work even in extreme frost down to -45C, maintaining elasticity. At the same time, they will ensure the transmission of high power current almost without loss.
This model is equipped with a convenient cover.

Recommendations for use:
Preparation.
Park the car next to it, turn off the engines, turn on the wipers, turn off all consumers. Check the integrity of the cables and the polarity.
Connection (as in the photo):
1 — Red clip to the "+" of the donor battery.

2 — The other end of the red to the positive terminal/state point under the hood of the car with a discharged battery.
3 — Black clamp to the “–” of the donor battery.
4 — The other black — to the mass of the car body with a discharged battery (clean metal bolt), not on "–" terminal.
Start.
Start the auto-donor and let it work for 2-3 minutes. Try to start the car with a discharged battery (turn the starter ≤10 s, pause 30–60 s; up to 2–3 attempts).
Disconnect.
In the reverse order: 4 → 3 → 2 → 1. Make sure that the clamps do not touch each other.
Safety.
Keep wires away from hot/moving parts; do not use damaged batteries/cables; do not mix 12 V and 24 V; hybrids/EVs should only be "lit" according to the manufacturer's instructions.

Main characteristics:

• Length: 2.5 m
• Power of starting current: 200 A